Epoxy Flooring in Bellevue, IA

Epoxy flooring in Bellevue goes into some of the oldest homes in eastern Iowa. John D. Bell founded the town in 1836, and it was incorporated in 1851. It sits in a valley between the North and South Bluffs, with the Mississippi on its east side and Lock and Dam No. 12 at its door. Limestone buildings from the 1840s and 1850s still stand around town, including Potter's Mill from 1843. Floors in houses this old come with their own set of problems.

Old foundations, old basements

Many older basements in town have stone or early concrete walls and floors that were poured, patched and repoured over many years. We often find:

• Uneven slabs with low spots that collect water
• Old paint or sealer that is flaking off
• Damp areas along stone walls
• Patches that never bonded to the original floor

We start every basement with a moisture reading and a close look at the walls. If the slab is sound and dry enough, we grind it, fill the low spots and cracks, and choose a primer suited to the reading. If the walls or floor are still taking on water, we will tell you that needs fixing before a coating.

Safe footing at any age

Bellevue's population skews older. In 2020 the median age was 44.6, and nearly a quarter of residents were 65 or older. For many households, the goal is a floor that is safe to walk on and easy to care for. We build for that.

• Textured topcoats: added grit for grip when the floor is wet
• Full flake finish: hides dust and scuffs so it doesn't need constant cleaning
• Bright colors: a light floor makes a dim basement or garage easier to see in
• Coated steps: the same texture on concrete steps between garage and house

Get a Free Estimate

Garages on the river road

U.S. 52 runs along the river through town as Riverview Drive, and Iowa 62 heads west toward Andrew and Maquoketa. Salt and slush come home on the tires every winter. In tight lots on the valley floor, garages are often small and detached, with older slabs. We grind off the worn surface, fix damaged edges near the door and install a sealed, textured finish that keeps brine on top.

Boats, campers and toys

Bellevue is a tourism and river town. Boat launches at the Municipal Boat Ramp and Spruce Creek Park are close by, and Bellevue State Park sits next to town. Many garages here hold a boat, a camper or a golf cart along with the car. Trailer jacks, gas cans and wet gear are tough on bare concrete. A thicker epoxy base with a chemical-resistant topcoat handles all of that and wipes clean at the end of the season.

Seasonal homes and rentals

Bellevue draws visitors from Dubuque and Maquoketa for the bluffs, the river and the steamboat cruises that stop along Riverview Drive. Some homes in town are rentals or seasonal places. A coated garage or lower level is easy to clean between guests and does not hold musty odors the way bare concrete can. Ask us about a finish that hides wear between visits.

What a Bellevue job looks like

We come out, measure the floor, take a moisture reading and talk through how you use the space. You get a written quote with the prep, repairs, coats and total. Most garages take one to two days, and we will tell you exactly when you can walk and park on the floor.